For industry Y-1500 experimental spray dryer is mainly applied to universities, research institutes and food, biological, beverages, chemicals, materials, pharmaceutical and other micro-enterprise development and production laboratories using particles. Device parameters machine all stainless steel, two-fluid atomizer spray structure; There nozzle cleaner (via needle), when the nozzle is blocked automatically cleared, the frequency can be adjusted automatically through the needle; evaporation of water: 1500mL / H ~ 2000ml / h maximum feed rate: peristaltic pump is adjustable up to 2000ml / h minimum sample volume: 50mL (depending on the material differences between solids content); built-in air compressor imported no oil, powder particle diameter was positively state distribution, mobility, and the noise is very low, in line with national standards laboratory noise; real-time regulation of PID temperature control technology, the heating temperature accuracy: ± 1 ℃; inlet air temperature control: 30 ℃ ~ 300 ℃ air temperature control: 30 ℃ ~ 140 ℃ nozzle diameter: 0.5mm, 0.7mm, 1mm, 1.5mm, 2mm optional and can be customized according to customer requirements; color LCD touch screen control, Chinese user interface. Spray head is located in the middle of the drying chamber, and the flow can be dried, can be counter-current drying, the drying time may lengthen or shorten the host size 700 x 505 x 1600 (mm) L x W x H in accordance with the size of the primary drying chamber the material characteristics 215mmOD X 500mm integer Machine power: 3KW / 220V; Weight: 75kg